Thảm Phun Nước Chơi Ngoài Trời Cho Bé

Đồ Chơi > Đồ chơi vận động & Ngoài trời > Bể bơi, phao bơi || Thảm Phun Nước Chơi Ngoài Trời Cho Bé
  • Giao hàng toàn quốc
  • Được kiểm tra hàng
  • Thanh toán khi nhận hàng
  • Chất lượng, Uy tín
  • 7 ngày đổi trả dễ dàng
  • Hỗ trợ xuất hóa đơn đỏ

Giới thiệu Thảm Phun Nước Chơi Ngoài Trời Cho Bé

--------Welcome to 💕 My Baby 💕 store-------------

Product name: water spray pad for children
Product specifications: 170 * 170CM
Product thickness: 0.20MM
Environmental protection PVC

❀ ❀ Inflatable products have the following precautions during daily use:

1. Do not approach sharp objects such as thorny plants or sharp stones or blades.
2. When using, add a base cloth under the inflatable product to prevent it from being punctured by debris.
3. Do not use it as a rescue buoy.
4. Keep away from flames or high temperature items.
5. When the temperature is high, do not put the inflatable products with the valve closed in the car or tent.
6. Do not touch sunscreen or alkaline drugs.
7. Please keep it out of the reach of pets.
8. The part of the gas nozzle is hard and should be avoided during the rest.
9. Do not expose to sunlight for a long time. Ultraviolet rays will slowly damage the surface material.

❀ ❀ How to repair inflatable products?

A. Repair the needle eye:

If your inflatable product is accidentally pierced by a needle or wooden puncture with one or more small needle holes, it is the easiest to repair:

1. Cover the gas nozzle after deflating the product to reduce the gas flow in the bed;
2. Take out the glue in the repair kit and put a drop of glue on the pinhole;
3. If the needle eye is large, take a toothpick, apply glue with the tip of the toothpick, apply it to the damaged needle eye, and then use glue to cover the mouth of the needle eye;
4. The repair is completed and wait for four hours before inflating.

B. Repair the scratched or scalded mouth

If your product is accidentally cut by a knife or burned by a fire, please don't panic, it can be repaired in the following order:

1. Cover the gas nozzle after deflating the product to reduce the gas flow in the bed;
2. Find the patch material in the patch package and cut a piece, which needs to be enough to cover the crack;
3. Apply the glue to the damaged area, press the patch, and glue the edge seam of the patch well;
4. Apply pressure to ensure that there are no gaps on the rubber surface, and press it firmly with smooth and heavy objects;
5. Wait for eight hours before inflating, and the repair is complete.

C, suede repair

1. Carefully clean up the repair area;
2. After drying, take out the patch and cut it, cover it on the damaged surface, and allow more around;
3. Apply a layer of glue to the patch and the damaged surface, and glue the edges of the patch well to ensure a thorough seal;
4. Use smooth and heavy objects to press it firmly;
5. Press tightly with heavy objects, inflate after 24 hours, and the repair is completed.

D. Other matters:

1. Remember not to inflate too much (especially in summer), and do not exercise too vigorously on the product, otherwise the pull strap in the product will be overloaded and broken, causing the product to swell and cannot be repaired, only scrapped.
2. The glue used for repairing is a chemical substance. Do not touch the eyes or s
Giá SCHO
Liên kết: Xịt khoáng 4 in 1 Yehwadam Revitalizing All in One Mist The Face Shop (120ml)