Version:
Handle and blade fully insulated up to 1000 V to DIN EN 60900 / VDE 0682-201.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Blades with taper tips, manufactured to the standard dimensions of slots on the screws.
Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade of high-alloy special steel.
Nicromatt chrome-plated surface, black tips or chemically nickel-coated Lasertip tips.
From size 5.
5 the outside ⌀ of the insulation is the same as the tip width (helpful when working in narrow spaces).
Application:
For use at voltage up to 1000 V.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size.
(see tables part).
Incorrect screwdriver size selection will cause damage to the screw head.
Content:
1 each screwdriver No.
663100:
Size 2.
5; 3; 3.
5; 4; 5.
5; 6.
5-----------

Number of screwdrivers
6

Standard
DIN EN 60900 / VDE 0682-201

Drive profile
Slot-head screwdriver

Type of product
Screwdrivers
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....